Updated 20 November 2026
You cannot identify a lab grown diamond by eye, under a magnifying glass or with a diamond tester. It is a diamond, so it looks and tests as one. A gemmological laboratory tells it apart by reading how the crystal grew. As a buyer, you confirm it by matching the number on the stone to its IGI report.
That is the whole answer in short. Below, the four ways people try, what each can really tell you, and the checks that take a minute at the counter. If you want the jeweller's side in more detail, our guide to whether a jeweller can tell a lab grown diamond walks through the instruments a trained eye relies on.
What each check can tell you
| Method | What it tells you | Can it tell lab grown from earth grown? |
|---|---|---|
| Your eye | How the stone looks: its size, shape and how it catches light | No |
| A magnifying glass (jewellers use a 10x one) | The small marks inside that one stone, and the laser inscription on its edge | Not by itself, but it lets you read the inscription |
| A thermal diamond tester | Whether the stone is a diamond or a look alike such as cubic zirconia | No |
| An electrical tester, or a tester that checks both | Whether the stone is moissanite | No |
| The IGI report and the laser inscription | Origin, carat weight, colour, clarity, cut and measurements of that exact stone | Yes, when the number on the stone matches the report |
| A gemmological laboratory | How the crystal grew, read with spectroscopy and growth pattern imaging | Yes |
By eye and under a magnifying glass
A lab grown diamond is carbon in the same crystal as a diamond from the earth. It is grown above ground from a small diamond seed, which our guide to how lab grown diamonds are made explains step by step. Same material means the same hardness and the same way of returning light, so there is nothing for the eye to catch. GIA, the gemmological institute, puts it plainly: "By eye, the difference can potentially be indistinguishable."
A magnifying glass does not change that. It shows clarity, the tiny marks inside a stone, and diamonds of both origins can have them or be free of them. A mark tells you about that one diamond, never about where it grew. What a magnifying glass is good for is reading the inscription on the edge of the stone, which is the check a buyer can actually do.
With a diamond tester
Most handheld testers in jewellery shops measure how fast a stone carries heat away. Diamond does this better than almost anything, so a lab grown diamond reads as diamond, every time. That is the honest answer to whether a lab grown diamond passes a diamond tester: it does, because it is a diamond.
What a tester is built for is telling diamond from look alikes. Cubic zirconia, the stone sold as American diamond, fails a thermal tester; our guide to American diamond vs lab grown diamond sets out the difference. Moissanite carries heat almost as well as diamond, so it can pass a thermal tester. That is why many testers add an electrical check: moissanite lets electricity through, while most diamonds do not. Moissanite is not a diamond, and our comparison of lab grown diamond vs moissanite explains why.
One thing to know: a few lab grown diamonds grown by the HPHT method carry traces of boron, which lets a little electricity through. On an electrical tester they can show a moissanite reading. If that happens, the stone needs its report or a laboratory check, not a conclusion at the counter.
Home tricks you may see online, such as breathing on the stone, dropping it in water or reading newsprint through it, tell you nothing about origin, and none of them can confirm a diamond on its own.
With the IGI report and the laser inscription
This is the check a buyer can do in about a minute. IGI, the International Gemological Institute, grades lab grown diamonds on a separate Laboratory Grown Diamond Report. On the IGI lab grown reports we checked, the number begins with LG, the comments name the growth method, CVD or HPHT, and the inscription on the stone reads LABGROWN IGI followed by the same number. On every Nivara solitaire, that report number is laser inscribed on the girdle, the thin outer edge of the diamond.
- Ask to see the edge of the stone under magnification. The letters are far too small for the eye but clear at 10 times. Any jeweller should offer this before you ask.
- Match the number to the paper. The number on the stone and the number on the IGI report must be the same.
- Look the number up with IGI. Enter it on the IGI website and confirm the shape, measurements and carat weight match both the paper and the stone in front of you.
The last step matters because an inscription can be copied. GIA has published a case of a laboratory grown diamond carrying a copied inscription that belonged to another stone's report. A number that matches, on a stone whose measurements also match the report, is the proof. Our guide to the IGI certificate shows every line of the report and how to verify it online.
In a laboratory
This is where origin is decided. A gemmological laboratory uses spectroscopy, which reads how a diamond absorbs and gives off light and reveals tiny irregularities in its atoms, and fluorescence imaging, which lights the stone with deep ultraviolet and shows the pattern in which it grew. A diamond grown by CVD shows fine layers; one grown by HPHT shows a cross shaped pattern of sectors. That growth record sits inside the crystal and cannot be polished away.
Some jewellers also use desktop screening instruments, which separate diamonds from the earth and lab grown diamonds in a couple of seconds and send any stone that needs it on for full testing. The result is what goes on the report. Nothing about it changes the diamond on your hand: it is the same hardness and returns light the same way, which is why the report, not the look, is how origin is shown.
What to ask before you buy
- Is it a lab grown diamond? A good seller says so first, without being asked.
- Which paper comes with this exact piece? For a solitaire, ask for the IGI report.
- Can I see the inscription on the stone, and does it match the report?
- For an heirloom, a pre owned piece or any stone without a report, ask for a laboratory report before you pay.
- Are the exchange and buyback terms in writing?
The same questions work across every one of the lab grown diamond brands in India, and the answers tell you as much about the seller as about the stone.
Solitaires you can check yourself
Each of these carries one centre diamond with an IGI report and the report number on its edge. Prices are for 14k gold and move with the gold rate.
Amora minimal solitaire, 1 carat, from around ₹72,000. A single round diamond of 1.00 carat, set into the side of a wide, smooth gold band.
Amara oval solitaire, 1 carat, from around ₹83,000. A single oval diamond of 1.00 carat in four prongs on a slim white gold band. The report gives its length and width in millimetres, so you can check them against the stone.
Amara split shank solitaire, 1.59 carat, from around ₹1,42,500. A single round diamond of 1.59 carat in four prongs on a split gold band edged with fine texture.
See more in our solitaire rings and lab grown diamond engagement rings.
What comes with every piece
- Solitaires in VVS or IF clarity, D or E colour and ideal cut, with hearts and arrows in every round. Smaller diamonds in VVS or VS clarity, E or F colour.
- IGI certification, and on solitaires the report number laser inscribed on the stone, so the paper and the diamond are one.
- 14k or 18k BIS hallmarked gold.
- A lifetime exchange at 100% of the current gold and diamond value, and a lifetime buyback at 100% gold and 85% diamond value.
- Lifetime polishing, cleaning and prong tightening, for as long as the piece is worn.
Read the inscription with us
The quickest way to understand all of this is to do it once. Book a private viewing at our showrooms in Hyderabad, Bangalore, Indore or Ahmedabad, and we will show you the number on the stone beside its IGI report. More than 2,500 designs are ready to take home across the four showrooms. Anywhere else in India or abroad, book a video consultation; we ship to 28 countries.
Frequently asked questions
Can you tell a lab grown diamond just by looking at it?
No. A lab grown diamond and a diamond from the earth are the same material, with the same hardness and the same way of returning light, so the eye has nothing to separate. A magnifying glass shows the small marks inside one stone, and both kinds can have them or be free of them. Origin is read in a laboratory, or from the IGI report tied to the stone.
Does a lab grown diamond pass a diamond tester?
Yes. A thermal diamond tester reads a lab grown diamond as diamond, because it is one. Testers separate diamond from look alikes such as cubic zirconia and, with an electrical check, moissanite; they cannot say where a diamond grew. On an electrical tester, a few lab grown diamonds grown by the HPHT method can show a moissanite reading because of traces of boron, which is a reason for a laboratory check, not a verdict.
How do I read the laser inscription on my diamond?
Ask the jeweller to show you the thin outer edge of the stone under magnification. The IGI report number is laser written there, far too small for the eye. Check that it is the same number as on your IGI report, then enter the number on the IGI website and confirm the shape, measurements and carat weight match the paper and the stone.
Does the IGI report say if a diamond is lab grown?
Yes. IGI issues a separate Laboratory Grown Diamond Report, its report numbers begin with LG, and the comments usually name the growth method, CVD or HPHT. On the samples we checked, the inscription on the stone reads LABGROWN IGI followed by the report number.
What if a diamond has no report and no inscription?
Then no shop test can settle where it grew. Take it to a gemmological laboratory for a report, which is also the right step for an heirloom or a pre owned piece. A laboratory can test a loose stone with the instruments that read growth patterns and trace elements.


